Welcome to Railway Forum! | |
![]() | Thank you for finding your way to Railway Forum, a dedicated community for railway and train enthusiasts. There's a variety of forums, a wonderful gallery, and what's more, we are absolutely FREE. You are very welcome to join, take part in the discussion, and post your pictures!
|
|
![]() |
|
Thread Tools |
#1
|
||||
|
||||
![]()
The Swedish Accident Investigation Authority have finished their report of the train accident, where a runaway train crashed into a building, in Saltsjöbaden last year.
It is available here: http://www.havkom.se/virtupload/reports/RJ2014_03.pdf Page 9-11 is an english extended summary for those (all of?) you that don't understand bureaucratic Swedish My summary below: During the night between 14th and 15 january 2014 a shunter and a cleaner was on duty in Neglinge depot. Empty trainset 7587 (Unit 2887-88) arrived Neglinge at 01.44. It was coupled to another unit (2893-94). The points was left in this position, to avoid the points freezing and preventing the first unit to exit the depot. After this, the traffic controller for Saltsjöbanan went off duty and, according to plan, left the traffic control center unmanned for the duration of the time when there were no train services. There was snowfall that night, and -3 degrees celsius. The special euipment to enable a trainset to be parked without applied brakes, avoiding the blocks to freeze to the wheels), was not working. The shunter therefore decided to solve the problem in his own creative way. (Although he is not the first one) He activated the driver's controls in the cab facing Saltsjöbaden, engaged the driver's safety device ("dead man's switch") using a loose brake block and closed the doors, to enable brake release. The doors were then released for individual control, to prevent engagement of tractive power. Sometime during the process the the train control lever was placed in the "Full power" position (probably when he or the cleaner pulled the drivers seat forward to enter the passenger compartment). The doors being in "Individual control" prevented the train from starting. The shunter left the train in this way and went into the depot to do some paperwork while the cleaner sweeped the floors. In her job description it is stated that after sweeping the floors, she should close the doors to see that there are no sand preventing the doors to shut. When she pressed the close button, the train started to accelerate. Because the points where left pointing onto the line, the train could accelerate towards Saltsjöbaden. The cleaner did not react at first, as trains often where shunted while she was cleaning them, but soon realized that it was going fast, and not in the depot. She had however no idea how to stop the train and did not know where to find the emergency brake, and the cab was unlit. After trying to pull out the key (which is impossible without deactivating the train first) she took cover under a seat directly behind the cab. After reaching a speed of 80 km/h it stopped abruptly (80-0 in 3 seconds) inside a building, with the cleaner injured and stuck. http://www.railwayforum.net/gallery/...ge.php?i=30224 When the shunter returned to the yard he found that the train, and the cleaner, had disappeared. He called a supervisor that rushed to the scene. While the shunter stood there, he saw rescue vehicles going with sirens and blue lights towards Saltsjöbaden. He then called "Trygghetscentralen" (the Public Transport Security Centre) and they told him a train had crashed in Saltsjöbaden. Feel free to ask any questions.
__________________
Railroad technician Last edited by Bobjork; 7th May 2014 at 21:22. |
#2
|
|||
|
|||
What an astonishing sequence of events, no matter what fail-safe equipment and procedures are in place, these extraordinary things will happen. Thank you for posting.
|
#5
|
||||
|
||||
Quote:
Quote:
__________________
Railroad technician |
#7
|
||||
|
||||
Quote:
Unbelievable. ![]() I can't help but be staggered that someone who works onboard trains had not been shown how to stop a train, i.e. operate a PassComm or Egress handle within the passenger areas. Quote:
BW Last edited by Beeyar Wunby; 9th May 2014 at 21:23. |
#8
|
||||
|
||||
The shunter carried out an unapproved procedure I'm sure, and is lucky that no one was killed. He's still in hot water I bet.
__________________
Hindsight is what you see from the guard's van ![]() |
#9
|
||||
|
||||
Quote:
They did tests afterwards, and If you didn't know how they looked or where they were placed, the emergency brake handles were hard to find in a dark cab... I haven't heard of anyone being prosecuted actually. Probably there is a good reason for it.
__________________
Railroad technician |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|