|
I had this problem at work a few times with a bachy 57, i fixed it by removing the bogie frame, make sure the 'bearings' on each axle sit in the corrcet gap, if they are not in properlly the axle does not move freely when turning a corner. now when putting the bogie frame back on they can be a bit of a pain as 'brake blocks' tend to fit around the wheels so slip one side on first not end but side than push it over the other side and push down till it clips on. obviosuly they may not be the same but the bachy 47 57 and 37's all have these bearings so im assuming the 66's do too.
Am at work tomorrow so will have a look at our drs one and see if i can get some photos for you. hope that helps. let me know if the problem persists and i may be able to have a look at them if you can get to York Model Railway?
|