|
Hi,
Well I got the drill out and opened up one of my busses. It now has several passengers. I've also added a occupants to a number of my Oxford cars as well.
I also opened up the rear doors on my BRS Parcels van. I drilled about six holes in the doors and with a sharp scalpel I carefully cut out the doors. A rear bulkhead was fitted behind the drivers seat and a floor was also added. I boxed in the rear wheels. New doors were made from plastic sheet and windows cut out. Remember I work in N gauge and the doors are 3mm x 6mm, with 2mm square windows. Just need to mix some paint to match the BRS green. Once it has a few parcels in the back it should look ok.
Alex
|