my dcc fitted hornby pendilino problems
 

hi all:)
i have a hornby pendilino dcc fitted and it does not move forward but can move backward which is strange any help would be most welcome

I suggest that you go back to the shop you bought it from and discuss the problem with them. I note from your other post that you are using the Hornby Select DCC Controller. Hornby should work with Hornby!

Best wishes,

John H-T.

thanks for help but it was working fine for about 3 months and then just wouldnt work so i dont know what happend i think it might have smthing to do with the wheels but i have no clue
Hornby:)

Good DCC opperation does require clean track and wheels so cleaning both might be the first thing to try.

Best wishes,

John H-T.

HI
Thanks a lot my pendilino is running smoother than ever somehow there was a massive clump of dust inbetween the wheels that was the proplem thanks john

Hornby:)

Glad you have sorted it out. If you clean your track before use and keep wheels clean you should have fewer problems.

Incidentally I would not rule out using other firm's model. However I would seek advice from you local model shop.

Best wishes,

John H-T.