Railway Forum

Railway Forum (https://www.railwayforum.net/index.php)
-   Railway News from around the World (https://www.railwayforum.net/forumdisplay.php?f=29)
-   -   Yet another Aussie run-away (https://www.railwayforum.net/showthread.php?t=16544)

aussiesteve 6th August 2019 05:35

Yet another Aussie run-away
 
Checking the ATSB web site just now, I have noticed yet another train has run-away without a driver on board.
This time a narrow gauge empty ore train rolled about 6 kms within the Whyalla SA steel works complex.
This incident occurring on the 31 july has not made headlines in the media here due to being only a minor incident.
But, yet another incident to provide interesting reading when the report is published.
https://www.atsb.gov.au/publications...r/ro-2019-015/
Steve.

Beeyar Wunby 7th August 2019 22:21

I know that there are reasons why the driver may have to step away from the controls, but surely they could fit a 'deadmans' (DSD in the UK) with a timer of reasonable length? Or a magnetic kill switch on a lanyard like you have on a boat, so that if you move away from the loco it pulls the magnet off a reed switch?

Cheers, BW

aussiesteve 8th August 2019 05:35

G'day BW,
The specifics of this run-away are not detailed as yet.
From memory the long yard at Whyalla falls downhill into the complex.
The narrow gauge ore trains are a decent length and are normally shunted and held in the yard just to the inland of the complex.
The motive power utilized was bashed by Morrison Knudsen.
When I was there last, some many moons ago, some of them bashed units had failed.
Aussie weasels etc do possess a Vigilance system.
No many possess a Dead Man system.
A Dead Man system only operates when the loco brakes are released and the reverser placed in gear.
Likewise the Vigilance system only operates when the locomotive brakes are released, and or the train brake is not in suppression.
I know from experience with stupid single brake block per wheel weasels that the locos may not hold a train stationary without a train brake application.
Single brake block per wheel being an attempt to prevent skidded wheels.
You slam on the loco independent brake or make a full service train brake and the loco has double blocks per wheel and you risk skidding them wheels.
Also, from experience, our A7EL and B7EL brake valves were prone to accidental independent release due to vibration.
The notch for full service independent can become worn and with the loco idling away over a period that handle can vibrate itself towards release position.
I don't know just what type of brake valve is on the bashed Whyalla locos.
One of the things that caused management angst in smog hollow on the squirts (suburban emus) was the hogger placing his bag on the deadman throttle.
One bloke worked out that he could use a large rubber band to tie around the T-bar deadman throttle on a Tangarbage and connect it to the reverser handle.
Get caught doing that and INSTANT dismissal.
You gotta shudder at the antics of some idiots.
The safety systems are there to KEEP YOU ALIVE as well as the cattle.
Smog hollow squirts today possess both the Deadman and Vigilance systems.
The most amusing run-away caper happened out at Cowra in 1994.
The Lachlan Valley Railway hystericals were having a weekend of soot belching etc.
So, I went out to take a gander.
I arrived just in time to take pot shots at the pair of CPH railmotors (tin hares) depart the depot.
They rattled past and I suddenly caught a glimpse of something in the corner of me eye.
A water gin was rolling down the slight grade chasing them Tin Hares down to the station.
E GADs.
One bloke went chasing after it attempting to crank on a handbrake.
Numerous nutters nearby were yelling at him to NOT do that.
He musta succeeded in halting the run-away.
Had he stumbled in the chase and fallen under the wagon, I hate to think of the consequences.
Had he not managed to halt it, then the LVR pride and joy tin hares woulda been snotted.
Obviously, the tin hares were parked in the same road at the depot ontop of the water gin.
And obviously there was NO handbrake applied to that water gin.
When the tin hares blasted off, the water gin then decided to follow.
The LVR did suffer some incidents and after a fatality, the rail regulator kyboshed them for a period.
The newbie moniker of the Independent Railway Australia was then concocted.
I will let you determine the context of that moniker.
https://youtu.be/cbeUO-l8ls8
Steve.

aussiesteve 18th November 2019 03:57

The ATSB have published a limited summary of the BHP Whyalla train run-away.
The cause being determined as a pneumatic control isolation issue.
This occurring during the change-over from remote belt pack operation to in cab operation.
When ever any alteration to a train air brake system is affected by closing isolating taps, the air pressure should be totally exhausted.
Otherwise a back pressure can be created that can actually release the train brakes.
I remember an incident up in the Hunter Valley some many moons ago.
The crew working an empty coalie had to run-around the train in a siding to change direction of travel.
When detaching the locos from the train, the brake pipe air pressure was only partially exhausted before the tap was closed.
While the locos were wandering around the train, it began to roll away.
I forget the exact location, but remember squizzing a photo of the signalman's chair on the ground.
The locoless coalie derailed and slammed into the signalbox.
Thankfully, nobody was killed.
It was mandated after that incident that the brake pipe pressure MUST be fully exhausted when detaching from a train.
Amusing that due to the SA Gov not funding the ATSB, they have discontinued any further investigation.
https://www.atsb.gov.au/publications...r/ro-2019-015/
Steve.


All times are GMT +1. The time now is 03:25.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.