Railway Forum

Railway Forum (https://www.railwayforum.net/index.php)
-   Railway Modelling (https://www.railwayforum.net/forumdisplay.php?f=26)
-   -   Wish List (https://www.railwayforum.net/showthread.php?t=314)

dario 29th January 2006 16:38

Wish List
 
Of course, there are always locos and coaches and wagons and structures etc that one would like to run on his layout or just to collect.
Please specify, if you please, for the model,
the scale (e.g. OO, OO9, HO, HOm, etc),
the system to run it (2-rail, 3-rail or DCC),
the manufacturer you would like to realize your dream,
and for the prototype, in addition to the common name or class,
the traction type (steam/diesel/electric)
the wheel arrangement,
the Railway Company,
the Epoch (I:1825-1925 or pre-grouping for GB,
II:1925-1946 or grouping for GB, III:1946-1965 approx,
IV:1965-1985 approx, V:1985 to this day),
the Livery,
a specific running number or name if such is the case.

dario 29th January 2006 16:57

As a starter, may I submit my wish (of course I am an Italian railfan).
If I write FS Gr.744, or LMS 6100, I would only be understood by a close circle of friends.
If I specify by the rules set above, I would like to see:
Scale: HO, 2-R, by Hornby International
Model of class 744 steam loco 2-8-0 + tender,
FS Italian Railways as running in Epoch III,
black livery (mandatory),
No.744.118 as preserved in Pietrarsa Museum.

DSY011 29th January 2006 19:33

Dario.
I would like a Rhodesian Railways 20A class 4-8-2 + 2-8-4 Garrett, Loco Number 717. I want it in 2R 2mm scale and made with all the detail that Dapol or Fleischmann build into their models. If not that Loco, then any 14A 15th or 20th class Garrett from Rhodesia.
SYD (DSY011)

dario 30th January 2006 20:38

I probably would long such a model myself, just for History of Railways.
But even the Australian Standard Garratt would do for me (I have only seen these).
But tell me, should it run on 9 mm std gauge or pure 6.5 mm narrow gauge?
Dario

P.S. Are you guys shy to add to the Wish List?

Trev 31st January 2006 00:06

I'd love to see a Class 76 and a Class 17 Clayton in 2mm scale.

And if we're talking about completely unrealistic dreams, I'd quite happily start spending my hard earned pennies on RTR British and Irish outline narrow gauge stuff. Not exact copies of loco's, you understand, but stock that looked like it ran in these islands. Anyone fancy a Lough Swilly 4-8-4T? :)

B.R.fan 31st January 2006 07:07

I think a complete blue pullman set would have to be at the top of my list for my OO railway, followed closely by an LMS garratt:)
Cheers Dave.

tomfassett 31st January 2006 07:59

I have to toss in with the Garratt camp here. An Australian version in HO, although I'd take just about any Garratt I could get my hands on if it didn't break the bank.

Tom F

dario 31st January 2006 20:54

Good on You!

DSY011 31st January 2006 21:24

I would not care if it ran on 9 mm std gauge or pure 6.5 mm narrow gauge, as long as it is a Garratt. Rhodesian, LMS or British industrial, Australian, S African, Argentine, Tasmanian, Spanish, Algerian, Dutch, Russian, India, Burma, Ceylon, Thailand, Turkey, Iranian, Indo-China, Brazil, Bolivian, Chile, Ecuador, Peru, Sudan, Ethiopian, Senegal & Ivory Coast, Sierra Leone, Gold Coast (Ghana), Nigerian, Madagascar, Mauritius, Belgian Congo, Angola, Mozambique, Kenya, Uganda, Tanganyika. All these countries ran Garratts. Any good model would be better than what we have now.
Six Garratts were built by the Italian firm Ansaldo in 1939 for use in Ethiopia. I have quite a lot of information on most of the Garratts from around the world, things like Class, Wheel Types, Cylinders Dia X Stroke, Boiler Pressure, Tr active Effort, Fuel & Water Capacity, Grate Area, Weight in Working Order, Heating Surface if anyone is interested.
Syd

dario 1st February 2006 18:59

Thank you for your post, Syd.
Your knowledge on Garratts is quite impressive.
I suggest you start writing about them on wikipedia, if you feel like it!
Regards from Dario

mendiprail 1st February 2006 21:00

00 Gauge
2 Rail
Hornby, using their new tooling techniques
Steam
0-6-0
BR ex-Southern USA Dock Tanks
1946-1965
BR Early Emblem
30075

dario 2nd February 2006 20:18

1 Attachment(s)
Attachment 12
Is this it? Former USATC 0-6-0T in former Yugoslavia, AD 1969.
Photo and scan Roger Griffiths [email protected], taken from railfaneurope.net

dario 2nd February 2006 22:30

1 Attachment(s)
I post a photo of my entry, a quite uncommon Consolidation designed for mixed traffic in hilly country, the very last italian design loco of 1928.
Attachment 14

mendiprail 3rd February 2006 18:50

yes
1 of those
there is a former yoguslavia built version at the esr
lovely engines all round

dario 4th February 2006 07:53

Thank you, mendiprail.
You have to excuse me, but if you mention a railfan railway enterprise to one like me, which is fond of railways but does not know them all, you have to write their full name.
What is "esr" and where is it?
Thank you again - Dario Romani

mendiprail 4th February 2006 18:45

east somerset railway, shepton mallet, somerset
a small branch line, soz 4 not being clear enough

dario 4th February 2006 18:54

Thank you. I'll try and locate it on Google Maps and Google Earth.
Please refer to my thread "Any railway on Earth" in Virtual Railways.


All times are GMT +1. The time now is 21:10.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.